Which Silo Has Room? How CAPI Monitors Grain Levels in Real Time How CAPI Controle e Automação uses non-contact laser sensors and ADISRA SmartView to track grain levels across multiple silos.
A truck pulls up with another load of grain. The operator has a simple question to answer before unloading begins. Which silo has room?
That question is becoming more important as Brazil invests in modern grain storage. In its August 2026 report, MarketsandMarkets projected that Brazil’s market for agricultural silos and storage systems would grow from $1.18 billion in 2025 to $1.45 billion by 2030. As facilities add storage, operators need a reliable way to track grain levels across more silos.
From above, the surface of stored grain can look as solid as a floor. But when grain flows toward the outlet during unloading, it can act like quicksand, pulling anyone standing on it down in seconds. How can operators check the grain level without stepping inside?
CAPI Controle e Automação, a Brazilian industrial automation company with more than three decades of experience, developed a non-contact sensor that measures grain levels without touching the crop. CAPI paired those sensors with ADISRA SmartView so operators could see real-time readings from multiple silos on one screen. When the next truck pulls up, they already know which silos are nearing capacity and which have room for another load.
A grain truck approaches the unloading bay at a Brazilian grain storage facility, ready to deliver the next load.
Which Silo Has Room for the Next Load?
A truck loaded with freshly harvested grain pulls up to the receiving bay. The driver is ready to unload, but first the operator has to decide where the grain will go.
An empty-looking silo may have less usable space than expected. Another may have plenty of room but already hold a different crop. The operator has to compare the incoming load size with each silo’s remaining capacity, confirm what’s already stored there, and consider whether the grain’s moisture is suitable for storage with the existing stock.
Checking all of that takes longer when the information is scattered across different screens or records. CAPI Controle e Automação simplified one of those checks by bringing real-time grain levels from multiple silos into a single ADISRA SmartView display. With the levels side by side, operators can quickly narrow down which silos to consider for the next load.
A non-contact laser sensor measures grain level from above, giving operators a reading without entering the silo.
Measuring Grain Levels Without Touching the Crop
So how does the operator’s screen know how full each silo is? A laser sensor measures the distance to the grain surface. As the silo fills or empties, that distance changes, giving operators a real-time level reading. Using the silo’s dimensions, the system can turn that reading into an estimate of how much storage space remains.
CAPI Controle e Automação’s non-contact sensors take these measurements without touching the grain. This avoids the mechanical wear associated with devices such as rotating paddles and vibrating switches. In applications that require automated filling or emptying, the same level data can also feed the controls for equipment such as conveyors, bucket elevators, and valves.
The technology can be used in grain silos and industrial tanks that hold bulk materials such as flour, cement, plastic pellets, and resins. In CAPI’s grain storage project, ADISRA SmartView brings readings from multiple silos onto one screen, so the operator can see which are approaching their fill limits before routing the next load.
CAPI’s ADISRA SmartView application lets operators compare grain levels across three silos at a glance, review historical trends, and check alarm limits for each silo.
What the Operator Sees
Back at the receiving bay, the next truck is waiting. The operator opens the ADISRA SmartView dashboard and sees the current grain levels across multiple silos side by side. Each silo graphic updates as new readings come in from CAPI’s non-contact sensors, helping the operator narrow down which silos to consider for the next load.
The operator can select a silo to see its latest reading, review how the level has changed over time, or check how consistently the sensor is reporting. Configurable high- and low-level alarms flag when a silo reaches a set limit, so operators can focus on the vessels that need attention.
Supervisors can use the same dashboard to review inventory trends and export measurement data for reporting. CAPI designed the system to support additional silos and monitoring points as the facility grows.
Ready for the Next Load
When the next truck pulls up, the operator needs to know which silo has room. By pairing non-contact sensors with ADISRA SmartView, CAPI Controle e Automação gives operators a single screen to compare current grain levels and see which silos are worth considering before unloading.
That need grows as agribusinesses and cooperatives manage more grain and look for ways to reduce post-harvest losses. One industry forecast projects that the grain storage silo monitoring market will more than double, from $376 million in 2025 to $775 million by 2035. Inventory monitoring helps operators see how much grain they have on hand. Temperature and humidity monitoring helps them decide when to adjust aeration to protect the grain already in storage.
Read the full case study to see how CAPI combined non-contact measurement with ADISRA SmartView in Grain Silo Inventory Monitoring. The link to the case study.
Explore how aeration protects stored grain in the Grain Aeration Systems case study.
Ready to try ADISRA SmartView 5.0? Download the free trial here
Want to see how it could work for your operation? Request a personalized demo here.
Keep the Soup Moving! Predictive Maintenance for a Soup Canning Line
It is peak production season at a soup factory. Mixers churn, cans move down the conveyor, and the packaging line hums. Then a conveyor motor fails, and the whole line stops. With soup still in process, the team must fix the problem and determine whether the batch can be saved.
What if the maintenance team could spot the warning signs while the line was still running?
Compressors, motors, and pumps all give clues when something starts to go wrong, but those clues differ by asset. A conveyor motor might draw more current than usual at the same speed and load. A pump might deliver less flow at the same speed. A compressor might take longer to build pressure. The challenge is knowing which signals to watch, what is normal for each machine, and when a change warrants a closer look.
In this webinar, we will follow a soup canning line and use its conveyor to show how ADISRA SmartView 5.0 brings predictive maintenance into an HMI/SCADA application. You will see how built-in machine learning can flag unusual equipment behavior and how the rule-based expert system can apply the knowledge of experienced operators and maintenance teams to guide newer operators on what to check next.
Whether you are expanding an existing HMI/SCADA project or planning a new application, you will see how to start with one machine and use its data to make better-informed maintenance decisions.
Choose your webinar session
Portuguese · Wednesday, December 9, 2026 · 8:30 a.m. CST / 10:30 a.m. BRT
English · Thursday, December 10, 2026 · 9:30 a.m. CST
ADISRA®, ADISRA's logo, InsightView®, KnowledgeView® and RapidView™ are registered trademarks and trademarks of ADISRA, LLC.
Try ADISRA SmartView 5.0 Free
Download the full software package or schedule a tailored demonstration.
